HMI-VOLCANO is a control panel, suitable for all VOLCANO air heaters. The panel is equipped with an interface operated by the ModbusRTU protocol for easy integration with building management systems (BMS).
HMI-WING is a control panel, suitable for all WING curtain types. The panel is equipped with an interface operated by the ModbusRTU protocol for easy integration with building management systems (BMS).
Universal controller for VOLCANO heaters and DR and WING curtains.
0-10 V controller is a small electronic instrument designed to manually control the fan rotation speed in heating devices, such as heaters and air curtains equipped with an appropriate controller adapted to this type of control signal.
Indoor temperature sensor with NTC characteristic curve It supports the VOLCANO EC (1-4-0101-0457) controller. Protection rating IP66.
Two-way valve with Belimo EXT-SW-E202V4C7 actuator with 3/4” connection diameter and female thread, activated in “open/close” mode with VOLCANO air heaters and WING water curtains. Valve compatible with VOLCANO EC and WING EC controllers.
The reed switch is mounted on the door or window (glued or screwed to the surface of the frame/casing from inside the room) to detect the opening thereof. Reed switch compatible with WING EC controller.
Wall-mounted DT TR110C controller is used to control the operation of all types of WING curtains and VOLCANO heaters with three-speed AC motors. The heating switch for the WING water curtains and VOLCANO heaters controls the operation of the actuator mounted on the valve. For electrical WING curtains, the controller also engages the electrical heaters. An in-built thermostat automatically disables the curtain or the heater, depending on the temperature set on the thermostat crank.
ARW3.0/2 auto-transformer speed control - manually operated with a 5-step adjustment scale.
ARW0.6/1 auto-transformer speed control - manually operated with a 3-step adjustment scale. It supports the Volcano VR MINI AC heater only in 1:1 configuration.
TR010 indoor thermostat has separate control outputs for heating (Volcano heaters) and cooling functions (VR-D destratification). When indoor temperature falls below its pre-set value, the heating contact is closed When indoor temperature exceeds its pre-set value, the cooling contact for Volcano VR-D is closed.
Holder set for WING 100
Holder set for WING 150 / 200
Set of 4 fasteners for ceiling mounting for Volcano heaters.