Comfort - Automatic selection of fan rotational speed in the function of temperature always ensures the thermal comfort in the building.
Ease of programming - The option of scheduling the calendar in “5+1+1” arrangement allows to set-up the optimal conditions for the building in a single move – for the whole week in advance.
Control - With built-in temperature sensor and the option to connect to the external NTC sensor, it enables full control of conditions in the room depending on the entered settings.
Intelligent - System Communication via MODBUS RTU over RS485 is a component of an intelligent building management system. Antifreeze function ensures the opening of two-way valve actuator when the temperature drops below 8°C.
HMI-VOLCANO is a control panel, suitable for all VOLCANO air heaters. The panel is equipped with an interface operated by the ModbusRTU protocol for easy integration with building management systems (BMS).
HMI-WING is a control panel, suitable for all WING curtain types. The panel is equipped with an interface operated by the ModbusRTU protocol for easy integration with building management systems (BMS).
0-10 V controller is a small electronic instrument designed to manually control the fan rotation speed in heating devices, such as heaters and air curtains equipped with an appropriate controller adapted to this type of control signal.
Indoor temperature sensor with NTC characteristic curve It supports the VOLCANO EC (1-4-0101-0457) controller. Protection rating IP66.
Two-way valve with Belimo EXT-SW-E202V4C7 actuator with 3/4” connection diameter and female thread, activated in “open/close” mode with VOLCANO air heaters and WING water curtains.
The reed switch is mounted on the door or window (glued or screwed to the surface of the frame/casing from inside the room) to detect the opening thereof.
Holder set for WING 100
Holder set for WING 150 / 200